Garage door not closing, If you’ve noticed that your garage door no longer closes entirely, the safety sensors on your garage door opener may be at fault. These photocells are typically located close to the ground. The safety sensors on the garage door prevent it from shutting violently and potentially harming or destroying anyone or anything underneath it.
Garage door safety sensors have an extremely important function, but they may also be to blame If something, such as a spider web or broomstick, blocks the garage door opener’s sensors, it will automatically reverse and stop operation. As a result, the door won’t be able to fully close.
When your Garage door not closing does not close completely or just opens halfway, there are a few common causes.
Check that there is nothing blocking the door. No matter how clear this issue may appear, it cannot be ignored. Check the garage floor and surrounding area for any foreign objects or debris that could be causing the problem. The garage door tracks and door itself must be inspected for debris that could impede the door’s movement.
Ensure that all safety features are operational.
Typically, garage door opener safety sensors are to blame when the door fails to close properly. Generally, this is the case. These sensors must be installed no more than six inches above the floor on both the open and closed sides of the garage door. One or both of these sensors may be lacking power or delivering incorrect data if the Garage door not closing.
Safety sensors for garage door openers are necessary for the safe opening and Garage door not closing. To prevent the garage door from shutting smoothly, it is essential to have these sensors installed by a professional and to perform routine maintenance on them.